Gmax Railway Earthing RDSO approved

Approx. Rs 2,500 / PieceGet Latest Price

• RDSO/SPN/197
• RDSO/SPN/176
• RDSO/PE/SPEC/PS/0109
• Brand: Gmax
• Silze: Customize
• Color: Golden

Additional Information:

• Item Code: RDSO-Gmax

Approx. Rs 2,500 / PieceGet Latest Price

Specifications:

• RDSO SPN 197
• RDSO SPN 176
• RDSO PE SPEC PS 0109
• Brand: Gmax

Approx. Rs 3,000 / PieceGet Latest Price

Specifications:

• Copper bonded steel electrodes of 3.0meter long & 17.2 mm dia with Copper bonding thickness of min. 250 microns and UL listed and marked = 1 no.
• Earth enhancement material supplied in sealed bags of min. 10Kgs = 3 nos.
• Cu-strip 150 X 25 X 6 mm to terminate earth rod = 1no.
• Cu-strip 300 X 25 X 6 mm (MEEB) = 1 no.
• Cu-strip 150 X 25 X 6 mm (SEEB) = 1 no.
• Supply of 35 sq.mm multistrand single core PVC insulated Copper cable as per IS:694 for connecting main earth electrode to MEEB in the equipment room in duplicate
• Supply of 16 sq.mm multistrand single core PVC insulated Copper cable as per IS:694 for connecting MEEB to SEEB and SPDs to MEEB.
• Supply of 10sq.mm multistrand single core PVC insulated Copper cable as per IS: 694 for connecting various equipments to SEEB.

Approx. Rs 3,000 / PieceGet Latest Price

Specifications:

• Copper bonded steel electrodes of 6 feet long & 17.2 mm dia with Cu bonding thickness of min. 250 microns and UL listed and marked = 2 nos.
• Earth enhancement material supplied in sealed bags of min. 10Kgs = 1 nos.
• Cu-strip 150 X 25 X 6 mm to terminate earth rod = 1no.
• Cu-strip 300 X 25 X 6 mm (MEEB) = 1 no.
• Cu-strip 150 X 25 X 6 mm (SEEB) = 1 no.

Approx. Rs 4,000 / PieceGet Latest Price

• Copper bus bar of size 250 mm x 50mm x 6 mm having electrical conductivity of 101% IACS
• Minimum 99.9% copper content shall be exothermically welded to rod with 4 holes of 12 mm dia. (2 on each side) for connecting earthing conductor
• Current carrying capacity: The design of the electrode should be such as to have more than 15kA current carrying capacity for 1 second.
• Primary conductor: MS pipe with 25 - 50 mm diameter, class B, ISI mark as per IS-1239, Length 2000 or 3000 mm
• Secondary conductor: MS pipe with 40-100 mm diameter, class B, ISI mark as per IS-1239, Length 2000 or 3000 mm

Approx. Rs 3,000 / PieceGet Latest Price

• The earth electrode shall be UL listed and of minimum 17.0mm diameter and minimum 3.0mtrs
• The minimum copper bonding thickness shall be of 250 microns.
• Brand: Gmax

Approx. Rs 1,200 / KilogramGet Latest Price

• Shall mainly consist of Graphite and Portland cement. Bentonite content shall be negligible.
• Shall have high conductivity, improves earth’s absorbing power and humidity retention capability.
• Shall be non-corrosive in nature having low water solubility but highly hygroscopic.
• Shall have resistivity of less than 0.2 ohms-meter. Resistivity shall be tested by making a 20cm. cube of the material and checking resistance of the cube at the ends.
• The supplier shall arrange for such testing at the time of supply, if so desired. Necessary certificate from National/ International lab for the resistivity shall also be submitted.
• Shall be suitable for installation in dry form or in a slurry form.
• Shall not depend on the continuous presence of water to maintain its conductivity.
• Shall be permanent & maintenance free and in its “set form”, maintains constant earth resistance with time.
• Shall be thermally stable between -100 C to 600 C ambient temperatures.
• Shall not dissolve, decompose or leach out with time.
• Shall not require periodic charging treatment nor replacement and maintenance.
• Shall be suitable for any kind of electrode and all kinds of soils of different resistivity.
• Shall not pollute the soil or local water table and meets environmental friendly requirements for landfill.
• Shall not be explosive.
• Shall not cause burns, irritation to eye, skin etc.

Specifications:

• Brand: Gmax
• Packing Size: Customise
• Weight: 25kg
• Shall be thermally stable between -100 C to 600 C ambient temperatures
• Shall have resistivity of less than 0.2 ohms-meter

Approx. Rs 4,000 / PieceGet Latest Price

Gmax The Terra Weld Exothermic Welding System provides the ultimate in permanent molecular bonding. The process of exothermic welding, in which no outside source of heat or power is required, is the universally preferred method of making electrical connections of copper-to-copper or copper-to-steel. Lightning protection and grounding systems require connections that maintain current carrying capacity exceeding that of the conductors used in the system. Terra Weld connections provide higher fusing capacity than the conductors to which they are bonded. System resistance, impedance, and ampacity relate directly to functionality, safety, and regulatory compliance. Terra Weld meets these challenges and delivers assurance.

Specifications:

• Brand: Gmax
• Size: Customise
• Material: Metal

Product Price :Get Latest Price

Specifications:

• Brand: Gmax
• Material: Copper
• Copper Strip: 150x25x6mm